ONOSOKKICounter for displacement sensorDG-4340The counter DG-4320/4340 is connected to the digital ruler sensor, and the sensor can accurately measure and display data. In addition, new functions required for measurement such as calculation and conditional storage have been added, which can also be effective on the production line. The various calculation results of DG-4320 can be output in BCD format. DG-4340 also has a comparison function on this basis. Provides a variety of counting functions for flexible use. The multiplication function can select 1, 2, and 4 times the input pulse. The coefficient setting function can multiply the measured value by any set coefficient value. The offset setting function can add any set offset value to the measured value. The decimal point position change function has nothing to do with the resolution of the sensor and can change the position of the decimal point. In the calculation function measurement, the maximum value, minimum value, and large difference range value (maximum value-minimum value) can be calculated and displayed. The coefficient, offset and other conditional data set by the conditional storage function can be saved in 4 groups respectively. In addition to digital rulers, encoders can be connected. BCD data output 3-channel comparison function can distinguish multiple levels of detection (DG-4340 only) Model DG-4320 DG-4340 Display LED segment, dot matrix composite display, 2 background colors, 6-digit display Display range 0 to ±199999 (When 0.5 µm resolution is set, the smallest digit represents 0 or 5) Applicable sensors Various rulers of our company (excluding GS-3800 series) 2-phase and 1-phase rectangular wave voltage output type sensors (encoders) Power supply output for sensor DC 5 V ±10 %, 200 mA Resolution 0.5 µm, 1 µm, 10 µm, 3 types*1 Input signal 2-phase phase difference rectangular wave, 1-phase rectangular wave voltage output (selectable setting) Input frequency range DC to 300 kHz Display data Instantaneous value, maximum value, minimum value, maximum difference range value (maximum value - minimum value) Calculation function Offset setting function, coefficient setting function, multiplication function, decimal point position change function Digital output BCD format output, update time 10 ms, open collector output (positive and negative logic can be set) Comparison - 3 channels, semiconductor relay method Upper and lower limit setting, OK/NG setting Background color indication Judgment result condition saving 4 sets of setting conditions can be saved Dimensions/weight 72 (W) × 72 (H) × 114 (D) mm/approx. 320 g Power supply voltage AC 100 to 240 V Operating temperature range 0 ℃ to +40 ℃ Approx. 6 VA (at AC 100 V) Storage temperature range -10 ℃ to +55 ℃ Optional accessories DG-0430 (power supply DC 12 V 150 mA for sensor), AA-8101 (BCD signal cable 3 m) AA-8101 BCD signal cable 3 m (for DA-4130 D/A converter) AA-8103 BCD signal cable 3 m (for connecting RQ-1410 to printer) AA-8107 BCD signal cable 3 m (one end is open) AX-2050N (power cable 3 m)